Tec 7 Bonding, sealing and fastening 310 ml oak
Op voorraad in ons magazijn
Directly available
Op voorraad in ons magazijn
Directly available
Tec 7 Bonding, sealing and fastening 310 ml oak
For more than 20 years now, TEC7 has been the best-known sealant for bonding, sealing and fastening. When it really has to be good, professionals and experienced handymen reach for the TEC7 tube. And rightly so!
TEC7 is the first choice for 80% of all applications. TEC7 replaces mounting, wood and PU adhesive, silicone sealant, acrylate adhesive, etc.
- Very good adhesion to virtually all substrates
- Does not attack plastics and mirrors
- Very good UV-resistance
- Does not bleed out on natural stone
- Fungus-resistant
- Can be applied very well to wet substrates, even under water
- Can be painted over with most paints
- Resistant to salt water
TECHNICAL INFORMATION
(also see the technical sheet) (.pdf)
Flow: 5 bar/ 3 mm/ 23°C 140g/min
Skin formation: 23°C 50% R.H. 8 minutes
Tack-free: 23°C 50% R.H. 25 minutes
Full hardening_ 23°C 50% R.H. 24h - 6 mm
48h - 7 mm
72h - 8 mm
E-modulus 100%: 172N/cm² /1.72 MPa
Volume shrinkage after curing_ < 3%
Hardness - DIN 53505: 60 Shore A
Tensile strength: 265N/cm² /2.65 MPa
Tear strength - DIN 53507: 140N/cm² /1.40 MPa
Thermal stability: -30°C to +90°C /peak: 155°C max. 30 minutes
Elongation at break - DIN 53504: > 350%
Non-toxic
Chemical resistance:
good: water, seawater, aliphatic solvents, oils, greases, diluted organic acids, lyes
moderate: esters, ketones, aromatics.
poor: concentrated acids, chlorinated solvents, chlorine of swimming pools
Shelf life: 12 months
Delivery form:
Tubes 310 ml in the colours
• white
• black
• grey
• brown
• beige
• terra cotta
• oak
• green
Tips from TEC7
- Proper preparation is the secret of all professionals. Use FOAM7 as a universal degreaser/cleaner.
- For organic soiling and/or large surface areas, HP7 is your best degreaser.
- Use the ergonomic TEC7 Gun for processing TEC7. This will save you from complaints resulting from RSI (repetitive strain injury).
- Every bonding is only as strong as the substrate. If your substrate is too weak, you can reinforce it with EPOFIX7, a deep-penetrating epoxy primer.
- TEC7 and other MS polymers adhere less well to Polypropylene (PP), Polyethylene (PE), PTFE (Teflon®), bitumen and silicones. Always do an adhesion test.
- Alkyd resin-based paint which is applied to TEC7 can have a longer drying time.
- For very flexible finishings or joints we recommend FLEX7.
- Do you want to suspend heavy objects very precisely? X-TACK7 is your best choice for power assemblies where an extremely high initial tack is required.
- For anchorings and fast bondings we recommend 2-K MIX7.
- Cleaning tools: TEC7 Cleaner and/or MAGIC CLEAN7.
- Hand-cleaning_ MAGIC CLEAN7.
http://www.novatech.be/userfiles/file/new_pdf/Nederlands/productfiches/TEC7_NL.pdf
Op voorraad in ons magazijn
Directly available